Which critical failure mode involves the incoming fuel/oxidizer mixture igniting before the spark plug fires due to excessive internal heat?
Answer
Pre-ignition
Pre-ignition occurs when hot internal surfaces, like the cylinder walls or piston crown, reach a temperature high enough to spontaneously ignite the incoming mixture before the intended spark event.
#Videos
We run an engine on pure oxygen - what will happen? - YouTube
Related Questions
What three primary components are necessary for the fundamental combustion reaction in an ICE?What percentage of Earth's surrounding air serves as the oxidizer for conventional engines?What happens immediately if an engine is run in an environment with zero ambient oxygen and no alternative oxidizer is supplied?What is the primary engineering challenge when an ICE is supplied with pure oxygen instead of atmospheric air?Which critical failure mode involves the incoming fuel/oxidizer mixture igniting before the spark plug fires due to excessive internal heat?What is the term for the rapid, uncontrolled explosion within the cylinder that can severely damage pistons and connecting rods?What component, present in atmospheric air, is removed when switching to pure oxygen, contributing to cooling inefficiency?If an engine must operate in an environment without atmospheric air, like on Mars, what modification is mandatory for its oxidizer supply?What type of construction materials are required for engine internals if they are intended to operate continuously under the sustained high temperatures caused by pure oxygen combustion?Why is a standard spark-ignition engine less suited to handle pure oxygen combustion compared to a liquid-fueled rocket engine?In an atmosphere like Venus's, which is primarily dense carbon dioxide, what is the consequence for standard hydrocarbon fuel combustion?